LCR Vertical Multistage Centrifugal Pumps - LCR pumps are vertical multistage centrifugal pumps with in-line design enables the pump to be installed in a horizontal one-pipe system where the suction and discharge ports are in the same horizontal plane and have the same pipe dimensions

Vertical Multistage Pump comes with various sizes and various numbers of stages to provide the flow and the pressure for different site conditions. Vertical multistage pump is suitable for a wide variety of applications from pumping of potable water to the pumping of chemicals. LCR pumps are available in various material versions according to the pumped liquid.

LCR, LCRI and LCRN pumps are vertical multistage centrifugal pumps. The vertical in-line design enables the pump to be installed in a horizontal plane single system where the
suction and discharge connections are in the same horizontal plane and have the same pipe sizes. This design provides a more compact pump design saving space and easy pipework
Lubi LCR pumps come with various sizes and various numbers of stages to provide the flow and the pressure for different site conditions.
LCR pumps are suitable for a wide variety of applications from pumping of potable water to the pumping of chemicals.
LCR pumps are available in various material versions according to the pumped liquid

Pump
The LCR pumps are non-self-priming, vertical multistage centrifugal pumps.
The pump consists of a base and a pump head. The chamber stack and the outer sleeve are secured between the pump head and the base by means of tiebolts. The base has suction and discharge connections on the same level (in-line).
All pumps are equipped with a maintenance-free mechanical shaft seal of the cartridge type as standard

Ambient temperature
If the ambient temperature exceeds 40°C or the pump is installed at an altitude exceeding 1000 m above sea level, the motor must not be fully loaded due to the risk of overheating.
Overheating may result from excessive ambient temperature or the low density and consequently low cooling effect of the air.
In such cases, it may be necessary to use a motor with a higher rated output.