AC125 Adhesive Metering System - Bench-Top dispensing system for epoxy, urethane, silicone, and other two-component materials.
The AC125 adhesive dispensing system is a piston meter mix machine designed for low to mid volume potting and encapsulating applications.
This adhesive dispensing system combines manual operation with the same high quality components used in more automated Ashby Cross adhesive dispensing systems to achieve the relatively low entry cost. May be ordered with manual or automatic drip-free static mixer dispense valve. Accurately dispenses epoxy, urethane, and silicone. Ratio accuracy ± 1% by volume. Method of operation is primarily pneumatic.
As a standard, are two, one-gallon tanks that feed the proportioning cylinders where the ratio of the material is established. Once the metering cylinders are full, the system is ready to dispense. By opening the manual mix/dispense valve (or optional drip-free automatic dispense valve), adhesive flows through the static mixer. When empty, the system is recharged by moving the "dispense/recharge" switch to the recharge position. The cycle repeats.
The unit can also be configured with larger tanks and an automatic, drip-free mix/dispense valve. This is operated with a foot pedal.
•Capacity at 1:1 ratio is 175cc - full stroke.
•Air required is 100 psi
•Ratio capability is 1:1 to 6:1
•Ratio change by changing the catalyst cylinder
•Used with pourable silicone, urethane, epoxy
•Disposable static mixers