Laser Marking and Cutting Systems - High speed laser marking, welding, cutting and deep engraving. Modular designs for stand alone use or integration into production lines.Workstation available. Maintenance free reliability

Laser Marking Systems
Applications
•Marks on virtually any surface - glass, ceramic, porcelain, metal, cardboard, paper, and materials
•Can be installed directly in a production line or used as a stand-alone laser marking system
Laser Marking Features
-The legibility of marks made by lasers is achieved through a color contrast between the mark and the base material. This contrast is a function of one of several processes such as annealing, engraving, surface etching, thermo-chemical reaction, and ablation.
-Laser marking can produce excellent results with better quality and lower costs than older technologies. Moreover laser marking offers a new dimension in speed, accuracy and repeatability. From bar coding to logos, laser marking offers the best alternative available for part identification. Ink -jet marking, labels, and stencil printing are distant seconds in performance and quality. Laser marking provides a permanent high quality mark without environmental issues associated with inks, chemicals, and other types of marking applications.
-Permanent laser marks are made permanent either by engraving or annealing of the base material. The laser marking can only be removed by destroying the surface, e.g. by grinding off.
-Fast marking up to 1000 characters per second
-Flexible for complex and variable marking patterns are produced in a simple and immediate way. Examples for the high flexibility of the marking contents provides logos, drawings, serial numbers, bar-codes, data matrix, pictures…
-Clean, safe and environmentally friendly. No inks, acids or solvents are required.
-No tooling to wear. Since laser engraving is a non-contact process, it can be used to mark parts that would normally be damaged by impact and/or vibratory marking methods. Marking and engraving can be performed on both flat and curved surfaces, as well as a variety of unusually shaped objects.
-User-friendly and low costs of preparation masks, stamps, or plates as base of conventional marking processes are not needed. Differing from these processes the marking contents can be easily generated with minimal programming using FlyCad, a simple and powerful software specially designed to provide all customer's needs. Wide range of materials, quality, precisions and reliability in all applications on a wide range of materials, such as metals, plastics, rubber, leather, paper, glass, marble, ceramic, chrome, multi-coated materials, etc.

Laser Cutting Systems
Maintenance Free Laser Cutting for:
•High Speed Marking
•Welding
•Cutting
•Deep Engraving
•Nominal Power of 20 to 200 W
•Laser Tube Life: 20,000 - 100,000 hours
•Marking Area: from 70x70mm to 800x800mm
•Integrated Air to Air Cooling
•Mains: 230V F+N / 380V 3F+N
•Sofware: Windows XP / FlyCAD
The ultimate solution for precision marking and micro-processing of all types of metals and plastics. Extremely compact, modular and perfectly sealed, it is configured for easy integration into any industrial production line. Isotech's laser cutting systems offer the perfect combination of reduced operating costs and high throughput.
MAINTENANCE FREE - The expected diode life of a fiber laser is in excess of 100.000 hours. A 2 year warranty is standard due to its extended reliability. 5 year warranties can be purchased as well.
LASER MODULE - Compact, 90° adjustable, with an ultra-fast scanning unit. Several laser controls (i.e. laser OK, oscillator failure, alarm reflected radiation…) including real time measurement of the emitted power.
CONTROL MODULE - It contains the Laser Generator, the Power Supply and the Server in a stainless steel 3U 19” rack. The POWER SUPPLY is protected against interferences and impulsive signals. The SERVER unit, for the control of the laser marking system is connected to the company network or to the client PC through a 100Mbit/s TPC/IP communication. There is an industrial 26pin round connector available to directly connect the start/stop signals, the marking light and the encoder signals if marking on fly is required. The server unit which controls the laser marking system is connected to the company network.
DUST PROTECTION FAN FILTER - is provided on the front panel of the Control Module so that the laser can easily be used in harsh industrial environments with oil and dust contaminants.
FLY CONNECTOR - A 25 mm diameter stainless steel connection between the laser and the diode module provides increased protection of the fiber and the cables. This design eliminates the risk of accidental breakage of the fiber. It also provides extra protection against electromagnetic interferences and electrostatic discharges
ABILITY TO INTEGRATE UP TO 8 MOTORS - The motor system is based on servo/stepper motors with encoder feedback and supports the use of a JOYSTICK for easy and very quick positioning of the parts to be marked. The interface is a RS485 Bus.
LASER OPERATIVE SOFTWARE - FlyX (ActiveX) and MotorX (ActiveX) provided for users that prefer to build their own application. FlyCAD for a system with complete software, for immediate use where all the more advanced functions have already been implemented