Range MDTC Metering Pump - For pumping highly viscous products with a low degree of flowability.Open hopper pump with cylindrical/conical compression zone and auger feed screw.
Open aseptic fork joint made up of only two components. Manufactured in keeping with the regulations of the 3A-Sanitary Standard. FDA approval. Conveying capacities: 0.5 l/h - 500 l/h | 0.132 USGPH - 132 USGPH. Pressures: up to 24 bar | 360 PSI

The MDTC range features a feed hopper with a cylindrical/conical compression zone. Conveying media with a low degree of intrinsic flowability or with none at all are fed to the conveying elements rotor and stator through the auger feed screw on the coupling rod. Optimum filling of the conveying chamber is achieved through the priming pressure generated in the compression zone. The pumps of the MDTC range are equipped with open joints of the MDC range and comply with the regulations of the 3A-Sanitary Standards of the USA.

Accessories
Dry Running Protection Device TSE
The temperature between the rotor and the stator is permanently sensed thermoelectrically via a temperature sensor integrated in the stator and compared with the limit value set at the TSE control unit.
When the pump runs dry, the temperature will rise due to the increased friction between the rotor and the stator. When the set limit value has been reached, the TSE control unit switches off the pump drive and triggers a fault message.
Dry Running Protection Device TSE – Food Grade
The general functional principal of the seepex dry running protection devices in food-compatible design is the permanent monitoring of the media flowing around the fork of the vibration limit switch. The fork of the dry running protection device is agitated through natural frequency. Medium flowing through the fork attenuates this natural frequency and thus triggers a signal. If this signal is not extant during pump operation, the pump has run dry and a fault message is issued
Dosing Device
The dosing device provides for setting the desired number of rotations for determining a specific delivery volume
Lantern Ring Supply Unit
The lantern ring supply unit is used for supplying the shaft sealing with sealing liquid. It can be equipped with a flow meter, if desired. With labyrinth seals, the flow rate can be adjusted and checked
CIP Connection
The CIP connection makes it possible to supply the suction chamber with a sufficient amount of rinsing fluid for thorough cleaning of the pump. The tangential arrangement of the branch ensures complete draining

Areas of Application for Range MDTC
Dough Processing and Bakeries
Pharmaceutical and Cosmetics Industry
Fruit and Vegetable Processing